Bringing up interface eth0: failed
location: linuxquestions.com - date: November 15, 2006
I cannot establish Internet connection in Linux.
This question was asked one thousand times,
I read the answers and followed them - nothing
worked for me. For example, I tryed /netconfig -
file not found.
On start up I have 'Bringing up interface eth0: failed'.
I tryed to change /etc/resolv.conf
and wrote nameserver and my IP-address (is it wrong?)
Please, help me; before I had
cable connection with automatic IP detection, now I have
fixed IP and have to use LAN-modem.
I have Mandrake Linux 9.1;
my mashine is Dell Inspiron 5150.
Many thanks for your help!
Bringing up interface eth0: FAILED
location: linuxquestions.com - date: March 29, 2002
I'm getting a "Bringing up interface eth0: FAILED" error when Mandrake 8.2 is loading. I uninstalled iptables/firestarter so its not my firewall blocking DHCP info. And think its a problem with DHCP but i can't fix it. Heres my logs.
Mar 28 23:49:21 mybox ifup: Determining IP information for eth0...
Mar 28 23:51:21 mybox dhcpcd: timed out waiting for a valid DHCP server response
Mar 28 23:51:21 mybox ifup: failed.
Mar 28 23:51:21 mybox network: Bringing up interface eth0: failed
Mar 29 12:08:27 mybox snort: WARNING: OpenPcap() device eth0 network lookup: ^Ieth0: no IPv4 address assigned
Mar 28 23:51:21 mybox kernel: PCI: Enabling device 00:0d.0 (0000 -> 0003)
Mar 28 23:51:21 mybox kernel: PCI: Found IRQ 11 for device 00:0d.0
Mar 28 23:51:21 mybox kernel: PCI: Sharing IRQ 11 with 00:07.2
Mar 28 23:51:21 mybox kernel: PCI: Sharing IRQ 11 with
Bringing up interface eth0 determining IP information fails
location: linuxquestions.com - date: October 16, 2010
CentOS 4.7 a minimal installation with no GUI
Ethernet Controller RTL-8029
Running /sbin/lspci shows the Ethernet card....
ifcfg-eth0 shows BOOTPROTO=dhcp
NIC is connected to a LINKSYS WRT54G running DHCP. There are plenty of available IP assignments. All other PC that I have connected to the LINKSYS work fine. The CAT 5 cable is fine.
Why is this NIC not taking a DHCP assignment ?
Error:Storage activation failed Kickstart installation
location: linuxquestions.com - date: January 25, 2014
I am trying to install centos 6.5 x86 using kickstart method. I am getting this error all the time. I have checked the options for kickstart file several times. Is this a bug or am I missing out on something. I have also attached the errors I encountered.
Here's my kickstart file...
#Tells the system to install a fresh system rather than upgrade an existing system.
#url --url http://192.168.88.135/ks.cfg
#Perform kickstart installation in text mode.
#Sets the default keyboard type for the system.
#Sets the language to use during installation and for the installed system.
#Sets the system timezone
timezone --utc Asia/Kolkata
#To initialize any invalid partition tables found on disks.This destroys all the contents of disks with invalid partition tables.
#Removes partitions from the system. By default no partitions are removed.
#Sets the bootloader.
network issue: bringing up interface eth0 rtnetlink answers file exists
location: linuxquestions.com - date: October 10, 2012
OS: fedora release 10
when i try to restart network service, ending up with following errors. There are two interfaces eth0 and eth1
Soft Reset Failed (Device Not Ready) error upon installing Ubuntu, Please help!
location: ubuntuforums.com - date: January 28, 2009
My system is:
Gigabyte EP45 DQ6 Motherboard
Nvidia 8800GTS 640mb Graphics Card
4GB Corsair Ram
Intel Core 2 Duo 2.2ghz
I boot into the DVD, choose "Install Ubuntu", and after the loading bar does it's thing, I'm presented with this screen and errors saying: Soft Reset Failed (Device Not Ready)
It's nothing to do with the Hard Drive brands I'm using. I've tried both Seagate and Western Digital of different capacities and I've tried booting without a Hard drive to install ubuntu. Same errors everytime.
Please let me know what to do! I can't figure it out.
Wired Connection not working says "device not managed"
location: ubuntuforums.com - date: May 14, 2010
My wireless connection has been giving me some problems, so I decided to try a wired connection directly to the router.
However, when I try to do that, it doesn't work. When I click the network manager icon, it says that the wired device is not managed.
ifconfig gives this:
Link encap:Ethernet HWaddr 00:13:d3:dd:12:79
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:d3ff:fedd:1279/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:364 errors:0 dropped:0 overruns:0 frame:0
TX packets:376 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:67274 (67.2 KB) TX bytes:69190 (69.1 KB)
I ran sudo dhclient to try release and renew my IP, in case that was the problem. It released and renewed successfully, but still didn't connect to the Internet.
Any help would be great!!
Soft Reset Failed: Device not ready
location: ubuntuforums.com - date: July 26, 2009
When booting my computer up, it gives me the above error and sits there for about 5 seconds before continuing boot. It doesn't matter if it is a fresh install of ubuntu, an old one, or even from the LiveCD, it gives me this error. It is really annoying; I don't even hard reset and it says this. Does anyone know the problem?
ata1: softreset failed (device not ready) failure to boot
location: ubuntuforums.com - date: April 9, 2009
I've started having a problem after an odd hard lock during an update today, and can't get the system to boot with any combination of root delays, all_generic_ide, noacpi, etc. Using EXT4 here, on an AMD SB700 southbridge.
The hard lockup was in the middle of a normal round of updates, it was processing something with the font cache when it stopped responding. On boot I now get "ata1: softreset failed (device not ready)", the usplash starts to do its dance, and then the system claims that /dev/disk/by-uuid/(my uuid) does not exist (which it does) and then drops to busybox prompt.
I figured an extra root delay may help, tried up to rootdelay=130 with no change.
The weirdest part is that I'm now unable to boot from the Jaunty Beta release on LiveUSB, it does the same thing.
Was there some major regression in the ACHI or SATA drivers in yesterday's kernel updates?
eth0: ERROR while getting interface flags: No such device; Failed to bring up eth0.
location: ubuntuforums.com - date: April 1, 2009
I just installed Ubuntu Server 9.04 Beta on a Compaq Proliant ML330 G2 server.
My problem is, it will not connect to my network.
I tried setting the IP to static, I got an error so I tried to change it to DHCP and I still got the same error. The error follows:
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
eth0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth0.
I can see the DHCP readout from /etc/init.d/networking restart so DHCP is trying to receive the information.
Running a ping of my switch gives me this:
connect: Network is unreachable
I have tried runnning 6.04 and 8.10 and they both have their own problems on this system during the installation, 9.04 at least gives me a system I can boot into and log in.
Any suggestions on how to fix this?
By the way, a physical inspection of the server shows that the lights on the NIC are on, so they cable and c
Page: 1 2 3 4 5 6 7 8 9 10