Cannot remove a device file
location: ubuntuforums.com - date: November 8, 2009
I'm rying to delete a file as root but I get
>> sudo rm -fr /opt/ltsp/_i386/
rm: cannot remove `/opt/ltsp/_i386/dev/pts/0': Operation not permitted
>> ls -lh /opt/ltsp/_i386/dev/pts/
crw--w---- 1 pepitos tty 136, 0 2009-11-09 16:10 0
rhel5 raid device cannot remove, no /etc/mdadm.conf file?
location: linuxquestions.com - date: November 19, 2007
Hi, when i am during install rhel5(Red hat linux enterprise 5) i not setup Raid drive. Than after finish installed, i only configure a testing raid, ok when i am create a raid partition,i am using command "mdadm" than i success create a level=0 raid device name is /dev/md0 in physical harddisk partition /dev/sda7 and /dev/sda8. After that i just want to remove this /dev/md0, i dont know what is the correct method to remove it, so i just use fdisk to delete partition /dev/sda7 & /dev/sda8. I reboot system, than i issue command # cat /proc/mdstat so no any raid infomation there.OK, now i want to create a raid level=1 , so i fdisk two partition /dev/sda7 & /dev/sda8 as fd(software raid), when i want to create the raid drive /dev/md0, but before i create why it automatic have the drive already on /dev/md0? i already remove using fdisk. Please teach me a way how to correctly remove software raid device like /dev/md0 ,/dev/md1 we are create.
Cannot install Ubuntu (or any distro); no configuration file found error on usb.
location: ubuntuforums.com - date: August 19, 2014
Hey all. I've spent the past few hours messing around and attempting to install Ubuntu with no success.
I have an 8GB Lexar USB drive which I used previously to install Linux Mint on another machine. Fast forward to several months later, I wanna put Ubuntu on another machine here. I've tried everything from formatting this drive to NTFS by changing drive policies and formatting to exFAT (both not even recognizing the USB at all). Using FAT32 gives me the "no configuration file found" error involving syslinux. I've tried renaming isolinux folder to syslinux, as well as the .bin and .cfg files. I've checked md5 hashes and verified they were correct as well as try other distros like Lubuntu and Mint again, but I keep getting the same error.
I'm at a total loss here. Is it my USB drive? Is there something I am doing wrong? Hoping for a timely response on this.
error: cannot open file 'boostatomicvc120mt158.lib' boost libs on Qt Windows8
location: linuxexchange.com - date: May 14, 2015
I am trying to build link boost library with Qt creator on windows. And I have downloaded boost prebuilt library compiled with msvc-12.0.
In my .pro file I have added
INCLUDEPATH += C:/local/boost_1_58_0/boost
LIBS += "-LC:/local/boost_1_58_0/stage/lib" -lboost_atomic-vc120-mt-1_58
But while building the project I am getting the error error: LNK1104: cannot open file 'boost_atomic-vc120-mt-1_58.lib'
My Qt version is Desktop Qt 5.4.1 MSVC2013 64bit
And the compiler list showing
I have downloaded boost library from http://sourceforge.net/projects/boost/files/boost-binaries/1.58.0/
and I choose boost_1_58_0-msvc-12.0-64.exe as I am using msvc-2013 as my compiler.
cl : Command line warning D9002 : ignoring unknown option '-lvda'
cl -c -nologo -Zm200 -Zc:wchar_t -FS -lvda -Zi -MDd -GR -W3 -w34100 -w34189 -EHsc /Fddebug\AcessControl-V1.pdb -DUNICODE -DWIN32 -DWIN64 -DQT_QML_DEBUG -DQT_DECLARATIVE_DEBUG -DQT_QUICK_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQ
Canot remove file Input/output error
location: ubuntuforums.com - date: April 7, 2010
I got a new HDD like a Storage on my Ubuntu ,it is formated as ext3 and i am able to mount it ,but sometimes while downloading from FTP ,when the session broke Ubuntu crates some ./afternature.mp4 Input/output error ,which i can see on "ls -l" ,and that causes great troubles to me ,because i can not copy or write on that disk another file with the same one which is created like this ,these error are gone only if i format the hdd .
My mounting command is "mount /dev/hdb3 /tmp/hd ext3 rw 0 0"
So is that possible to remove these error without formatting the disk .
PS:I did a lot of search for that error ,on unix forums also here but i didn`t find a concrete answer ,i found a thread which is for that case but removing with inode is impossible because on ls -l i`m not receiving the inode .
Best on advance
Error: cannot remove "libtoolT"
- date: April 25, 2012
Iam using CentOS 6.2 x86 64 and i have installed apache(httpd) and mysql through yum repository and i have installed
# yum install zlib*
# yum install libtool*
# yum install gcc*
and now iam installing tomcat connector in /usr/share iam facing below error can any one help me on this to solve
# cd /usr/share/tomcat-connectors-1.2.35-src/native
# [[email protected]
buildconf: checking installation...
buildconf: autoconf version 2.63 (ok)
buildconf: libtool version 2.2.6 (ok)
buildconf: libtoolize --automake --copy
buildconf: automake -a --foreign --copy
native]# ./configure --with-apxs=/usr/sbin/apxs
checking build system type... x86_64-unknown-linux-gnu
checking for poll.h... yes
checking for poll... yes
checking for target platform... unix
no apache given
no netscape given
configure: creating ./config.status
config.status: creating Makefile
config.status: creating apac
Cannot remove or list directory (ls or rm) Linux Debian
location: linuxexchange.com - date: May 23, 2012
I have a log file directory at /var/log/apache2/vhosts on a Debian dedicated server. Every day I split the main access_log into respective vhostname.com_access_log files in /var/log/apache2/vhosts
In the last week or so I have noticed the server has become unresponsive and every time this happens there seems to be multiple log rotate instances running.
After some investigation I decided to check the contents of /var/log/apache2/vhosts to see if there was some sort of problem. I can 'cd' into the directory but cannot list its contents. The 'ls' command does not die it just doesn't do anything.
After trying various different ways to list the contents of the file I decided to just delete it and create a new file. Running rm on the directory from the parent directory didn't seem to work either however: rm -rf vhosts. From a view of 'top' I can see 'rm' is running and using a small amount of cpu... It has now been running for about an hour.
Any ideas what is going on and how I can get r
[SOLVED] Emacs colortheme and Cannot load file error
location: linuxquestions.com - date: May 30, 2012
I've been trying to get color-theme to work on Emacs 23.4.1, but I receive the following error after launching Emacs:
Zentyal File Server Error
location: linuxquestions.com - date: July 27, 2013
I have been using Zentyal 2.0 as a file server with the following file sharing method,
And created group as managers, group1, group2 with the file sharing permission as follows
managers --> /server
group1 --> /server/Folder1
group2 --> /server/Folder2
The above settings was working fine. The same setup is not working with Zentyal 3.0. The managers group only could access /server, the other groups couldn't access their folders respectively. Any idea how to implement the above setup in Zentyal 3.0?
[SOLVED] RTNETLINK answers: File exists Error when doing ifup on alias (eth1:1) on RHEL5
location: linuxquestions.com - date: March 11, 2009
Posting this as a solution since I didn't see the exact question when I Googled and a lot of what is written is fairly esoteric and not really germane:
I'd created an ifcfg-eth1:1 on a RHEL5.3 server. On running "ifup eth1:1" I got the following error.
"RTNETLINK answers: File exists"
A Google search mentioned this various times but nothing truly consistent and nothing directly related to what I was doing. Some mentioned routing which made me look at "netstat -rn" outuput. I saw it had added a new bogus route to the table. Also there was some discussion of the fact that message is somewhat bogus as it isn't a regular "file" that exists but rather a "file" in the broad sense that sockets, shared memory segment, et al are considered "files".
One link mentioned /usr/share/doc/initscripts<version> directory.
Reviewing documents there led me to the realization that starting any alias for an interface will
Page: 1 2 3 4 5 6 7 8 9 10