Flip video will not play
location: ubuntuforums.com - date: October 12, 2009
I have received flip video messages in the past but now I am unable to download a video message sent to me.
I get RSL error 1 of 1, and in the text block/strip below the viewing area I see an error message, Error 2046.It looked like the video was loading then it stopped and gave me the error messages,
I called Flip and they don't know what it is, does anyone have a clue why I can't download my video message after it has been uploaded to the Flip site then sent to me from the Flip message web site??
Dell 3007WFPHC, ATI HD 5450 will not display properly
location: ubuntuforums.com - date: November 1, 2011
I have installed Ubuntu 11.10 on a Dell Optiplex 990, and cannot seem to get a resolution other than 1280x800 on my 30" monitor (Dell 3007WFPHC). I am using a DMS-59 to DVI-DVI splitter cable.
I initially tried installing the proprietary ATI driver "FGLRX," and was not able to get the system to display the correct resolution (2560x1600) using the Display GUI, or using xrandr. I was unable to install the proprietary driver "FGLRX update".
I tried installing 11.04 with the same result.
I am back on 11.10, and have stayed with the default open source driver, trying to get the video card/monitor to display at anything beyond 1280x800 with the xrandr utility. When I set the output using xrandr, the screen will either turn black, or display colored garbage. I have tried other supported resolutions like 1600x1000, 1920x1200, 2560x1600, with no success.
I have another 17" monitor hooked up to the other DVI output, and ubuntu detects the supported modes ju
VMware + Ubuntu Linux NAT will not allow internet access
location: linuxquestions.com - date: December 16, 2012
Hello everyone, just last night I came across a weird problem...
Okay well here is my setup...
I have Windows 7 running as my Host OS. I have Ubuntu Linux running as my Guest OS. Now I have pretty much always used NAT as my network setting for VMWare player, yet last night for no reason my internet just stopped working. I did not alter any host/router files or do any kind of network configurations.
So i figured it was just a problem a simple reboot would fix but when I did reboot my computer and ran vmware player again and started linux with NAT my internet was not working.
Now when I would do a ping for google i would get this kind of reply.
ping: unknown host google.com
Now i have no idea what could have caused this, I swear to you all I did not touch anything!
Okay so let me give you some info...
ubuntu lucid will not mount android 2.1 phone storage
location: linuxquestions.com - date: October 26, 2010
When I connect my Ubuntu Lucid laptop to my Android 2.1 phone (Samsung Galaxy-S "Captivate"), I see the following in the logs:
USB stick will not boot Ubuntu 11.04
location: linuxquestions.com - date: June 1, 2011
I am feeling that I am banging my head against a brick wall and am fearful of enjoying it.
I wish to work with Ubuntu 11.04 but rather than see how it looks from a Live CD my thought was to have the OS on a USB stick. By using the USB my idea was that any changes I wished to make would be saved and could be altered without having to start from scratch when using a Live CD.
I therefore followed the instruction on the Ubuntu download page but have not been able to load 11.04 from the stick.
At the moment I have 2 laptops dual booted. One has windows XP & Lucid the other windows 7 and Lucid. Attempting to load 11.04 on the stick only results in the usual Grub options but there appears to be no option that would permit booting into 11.04.
I have my Boot Sequence set as : Removable, CD/DVD, Hard Drive & finally Network so I really expected that the USB would have been read and actioned.
How can I boot 11.04 from the stick? Where am I going wrong ?
DNS server not working
location: ubuntuforums.com - date: March 8, 2013
I've been trying to configure my own server but I'm currently stuck and I don't know what else to try.
I've got a domain ganganadores.cl and I'm trying to host my own DNS servers.
I'm using ISPConfig 3 and Bind9. I've used the guide from http://www.howtoforge.com/perfect-se...ot-ispconfig-3
For some reason the DNS server is not working, if I try pinging ganganadores.cl I get an error as the server can't be found.
http://www.intodns.com/ganganadores.cl shows the same thing.
What can I be doing wrong? here is my ISPConfig.
Ubuntu 7.10 jeos fresh install, will not boot
location: linuxquestions.com - date: March 26, 2008
I just installed ubuntu-7.10-jeos-i386
found on their website and it hangs up on start up
giving me "[<c02f1592>] error_code+0x72/0x80"
I believe all my base hardware is pretty standard.
Intel motherboard with on board video
Intel celeron 2.93GHz processor
NEC 3540A DVD±RW
Hard drives I have 40GB, 40GB, 80GB, and a 320GB
Realtek AC'97 Audio
NVidia GeForce FX 5200 PCI video card 256MB
NVidia GeForce FX 4000 PCI video card 256MB
(yes three screens)
3.5" multimedia card reader
12"x9" adesso tablet (not hooked up, I have to get a regular mouse)
only have one 40GB hard drive hooked up by itself on IDE and one DVD±RW
I had successfully installed it but still gets stuck time after time, while booting.
*is it the video cards?
*should I try another drive configuration? (I've even tried having only the HD hooked up)
After this I'm going to disconnect everything that is not needed and try booting again. and also using the on board
[SOLVED] Ubuntu runs off Live CD but will not boot from hard drive 13.04
location: ubuntuforums.com - date: August 7, 2013
I installed Ubuntu a couple days ago. I got it to boot (after tons of trouble), and it seemingly worked fine. However, after troubles with my HDMI (no sound) and presumably my AMD drivers, I decided to install a proprietary driver for AMD Catalyst, which in turn made Ubuntu unusable. To combat this problem, I had Ubuntu delete the old install and reinstall itself. This time, however, I cannot seem to get it to boot correctly. I can boot using the trial from the Live CD, but without the CD I cannot access Ubuntu. I've tried Boot Repair (which for some reason in its *advanced options* section all of the other options were unavailable to me) and restarted -- that didn't work. Next, I tried to reinstall, once again deleting the old Ubuntu, and still had no luck. I thought maybe my Bios settings were screwing it up, but everything is set so the hard drive boots first. I'm not exactly sure what else I should do.
My PC Specs:
HP tower model: h8-1210t
RAM/Memory: 6Gib (5951Mib)
Ubuntu Quickly 'builder' object will not auto complete in eclipse
location: ubuntuforums.com - date: February 15, 2012
I am trying to use Quickly to develop a GUI App. I am editing my code with eclipse/Pydev just because I prefer that over Gedit, but no doubt that will fill this thread with opinions rather than an answer to my question.
Here is some basic information on my project in case it helps.
Project Name: ListFiles
Call backs to signals located in: ListFilesWindow.py
Here is the question.
I am using the 'builder' object to set_text() and get_text() but I don't get any code completion.
I am assuming that this object has been created by 'Gtk.Builder'. If I make calls directly to Gtk.Builder code completion does work, but this is just creating a new object that is not linked to the GUI that has been created by Quickly.
The following line is included in ListFilesWindow.py by default
from gi.repository import Gtk # pylint: disable=E0611
But even if I comment out this line the programme still works.
So how do I get code completion to work on Gtk objects in eclipse and am I pu
Gwget will not mirror site
location: linux.com - date: September 26, 2009
I just installed Gwget in Ubuntu. When I define a new download to mirror a whole site, and enter the url as http://sitename.com, it only downloads the index.html file, not the whole site. Can someone help with this?
Page: 1 2 3 4 5 6 7 8 9 10