How to mount USB Device 017?
- date: May 16, 2012
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0409:0058 NEC Corp. HighSpeed Hub
Bus 001 Device 003: ID 0409:0058 NEC Corp. HighSpeed Hub
Bus 002 Device 002: ID 0781:5530 SanDisk Corp. Cruzer U3 4gb SDCZ36
Bus 002 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 004: ID 04ca:0040 Lite-On Technology Corp.
Bus 001 Device 005: ID 192f:0416 Avago Technologies, Pte.
Bus 001 Device 014: ID 045e:070f Microsoft Corp.
Bus 001 Device 007: ID 1058:0704 Western Digital Technologies, Inc. Passport External HDD
Bus 001 Device 017: ID 0781:5530 SanDisk Corp. Cruzer U3 4gb SDCZ36
How to mount USB device based on ID
location: ubuntuforums.com - date: September 7, 2012
I have a USB flash drive that won't mount and won't show up at "ls -l /dev/sd*". However, I am able to see it using the command "lsusb".
Is it possible to mount it just by knowing the ID of the device lsusb gives?
P.S.: I'm not able to see the flash drive anywhere else, e.g. in GParted.
Thanks, in advance!
How Do mount USB stick connected to pcmciausbadapter
location: linuxquestions.com - date: February 9, 2008
I have ooold laptop pc, which has only either floppy drive or cd-rom in any time.
Of course system Bios does not support booting from cd rom.
I have Tomsrtbt on a 1.72 Floppy, which I have used to fdisk my entire HD as:
/dev/hda1 system:Linux (83) Boot *
/dev/hda2 system:Linux (83)
/dev/hda3 System:Extended (5)
/dev/hda5 System:Linux Swap (82)
/dev/hda6 System Linux (83)
Haven't figured out yet how to get it to boot from hda1.
mounted /dev/hda1 /mnt
chroot /mnt /sbin/lilo -->chroot: cannot execute /sbin/lilo: No such file or directory
So what needs to be copied to /mnt to get it to boot ( so I could change cd-rom drive instead of floppy and install something)
I do have USB adapter (4x usb port) fitting into PCMCIA slot,
and 1Gb usb stick. But i have no Clue how to mount that usb stick over that pcmcia card ???
dmesg tail :
Linux PCMCIA Card Services 3.1.29
kernel build:2.2.20ext3 unknown
options [pci] [cardbus]
Intel ISA/PCI/CardBus PCIC probe:
How to mount usb device when it is not detected
location: ubuntuforums.com - date: August 13, 2008
I have a mp3 player with a flash drive. The file system is FAT32.
When I insert in the usb port, the device is not detected automatically.
I tried the guide: https://help.ubuntu.com/community/Mo...lly%20Mounting
xx:~$ sudo fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x7ab852fc
Device Boot Start End Blocks Id System
/dev/sda1 * 1 14219 114214086 83 Linux
/dev/sda2 14220 14593 3004155 5 Extended
/dev/sda5 14220 14593 3004123+ 82 Linux swap / Solaris
According to the guide, the usb device should be called something like /dev/sdb1. I also tried the same command without the usb drive plugged in, it outputs exactly the same.
What should I do?
How to find USB device by product ID and vendor ID in kernel space?
location: linuxquestions.com - date: June 19, 2014
I want to know how to find USB device information by product ID and Vendor ID in kernel space.
Just want to refer the device information(*), do not need to write data using the resource.
transfer the data using libftdi driver instead, so can not use MODULE_DEVICE_TABLE to call probe().
(*) should be.. struct device or struct usb_interface or struct usb_device
how to mount usb device from command line
location: ubuntuforums.com - date: September 23, 2009
I know how to mount devices of which I already know their names (sda2, sdb1, etc..., or by UUID numbers), but how do you know the name of a usb device you might want to mount from the command line? I've got a mutli card reader, and I have no idea what the names are of the different "slots", or even the usb ports on my box. If it weren't for nautilus and the gui- I'd be lost.
how do I update device drivers?
location: linuxquestions.com - date: June 13, 2006
I have a Debian system (started as Kanotix BH9a). I want to upgrade the drivers for the video (i810) and the DVD driver (driver: haven't a clue).
Reason: The video setup gives segmentation fault with several applications and the DVD gives seek errors trying to read disks which read OK in windows using the same DVD drive (dual boot system).
I have recently discovered that these errors do not occur with a new Debian install or with a new Kanotix install. I have tried to build up one of these installs into a replacement system for the old BH9 install but I am having setup problems. One of the issues is that there appears to be a bug in Digikam which is preventing me from getting my Kodak V550 camera to download & until I can get the camera to download I dare not switch to a new system (read: face the wrath of the OTHER USER).
So, I want to try to update the drivers in old system. How do I do this?
How do I ignore a usb device?
location: ubuntuforums.com - date: March 12, 2010
Ive tried using quirks in
and also in usbhid.conf
and also as a command line option in grub2's grub.cfg
the usb device shows as two in lsusb
Bus 004 Device 004: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
Bus 004 Device 003: ID 08bb:2901 Texas Instruments Japan
everything I do I just cant get linux to leave the device alone. Its an icom PCR-2500 and Id like to use it in vmware with windows XP, but linux keeps trying to use it and obviously doesnt have a clue how.
Ive blacklisted the kernel modules it uses
the problem is that 08bb:2901 also attaches itself t usbhid which I need for my keyboard and mouse, so I cant blacklist that module. So I tried getting usbhid to ignore it via quirks but with no resolve, it keeps attaching itself.
options usbhid quirks=0x08bb:0x2901:0x0004
in the two conf files in /etc/modprobe.d/
in grub2's grub.cfg
SOLVED/IGNORE usb drive read only how do I change that?
location: ubuntuforums.com - date: April 9, 2012
For some reason when I try and copy a file to my usb flash stick (which was working fine earlier today) it says "the destination is read only" how do I change that using terminal or whatever
[SOLVED] how do I configure a CDC ethernet device ( a 4g USB dongle)
location: linuxquestions.com - date: October 2, 2010
I have a usb 4G dongle which has stated no linux support in australia from vividwireless.
The flip flop part does not exist for me in the sense I can not see the cd autorun files so I downloaded the files off the net and put them in my wine directory
I attempted to run the exe file thru wine but whether I try graphical or command line....it defaults to a graphical dialog box....I click on English...installer then shows the dialog box for the welcome screen ...then I click on next and the screen shows for a nanosecond the user agreement but exits with no log etc.
2) so in linux here is the info
Page: 1 2 3 4 5 6 7 8 9 10