ipmi on Intel SE7525 kernel 2.6.21?
location: linuxquestions.com - date: May 8, 2007
I was not paying attention during my last two kernel updates on my Gentoo server and I broke my thermal monitoring with ipmitool. I am unable to get the ipmi_si kernel module to load as it claims there is no ipmi interface. I know there is, and it was a pain to get working but it did work. Might anyone know the correct forum to help me out?
kernel 2.6.21 in DSL 3.3
location: linuxquestions.com - date: May 10, 2007
Hi ya' all...
First and foremost I do apologize for being too stubborn as I've read stuffs regarding DSL 3.3 and kernel 2.6's and should one insist in using 2.6 kernel in DSL just opt for DSL-N and all those stuff...the thing is, I love using DSL 3.3 and the fact that I can compile in DSL and not in DSL-N...most recently though, I've wanted to start toying with Solaris,NetBSD and OpenBSD using vmware but it says in DSL 3.3 that it can't compile the vmware module as the kernel was compiled using gcc 2.59.x and the current gcc dsl's 3.x...and so I decided to just upgrade the kernel, here was what I did:
Help getting IPMI patches into kernel
location: linuxquestions.com - date: February 17, 2008
I need to setup and configure IPMI on 2 boxes that run Centos5.1 x86_64. The docs that came with the driver are very sparse and don't really give any info about why you are doing the steps they lay out. Besides they say go get the latest 2.6.8 kernel source so I am already skeptical.
The instructions say to get your kernel source then download these openipmi patches. Actually the ones in the docs were different on a couple of occasions but these are what is listed for the 2.6.18 kernel on the download site.
The patches zip has MANY other patches inside and I do not know about the series file.
Anyway I am to apply these patches and then build a new kernel and its modules.
Has anyone gotten IPMI to work in your kernel? Can someone
How to Compile a Kernel on Fedora 21
location: linuxquestions.com - date: January 1, 2015
Hi guys I am wondering if anyone can point me to a step by step guid to compiling my own Kernel in Fedora I have been doing it for quite some time in Slackware but not Fedora any help would be appreciated cheers in advance
[SOLVED] New kernel 3.14.21 nonPAE for Dreamlinux 5 and Debian Wheezy
location: linuxquestions.com - date: May 14, 2014
New kernel 3.14.2-1 non-PAE (without PAE) with Debian patches for Dreamlinux 5 and Debian Wheezy. Build the packages with GCC 4.6.2 (Debian 220.127.116.11). For use on PCs with Intel Pentium Pro/II/III/4/4M/D/M, Xeon, Celeron, Core, Atom, AMD K6, Geode LX/NX, Athlon (K7), Duron, Opteron, Sempron, Turion or Phenom and other. Support multi-processor, multi-core or hyper-threaded systems.
Link: http://www.mediafire.com/download/gx...nux_1_i386.deb (linux-image)
Link: http://www.mediafire.com/download/gb...nux_1_i386.deb (linux-headers)
Link: http://www.mediafire.com/download/0j...non-pae.tar.xz (linux-source with config)
Link: http://www.mediafire.com/view/3fvofqf9d9xttnd/config(2) (config)
[SOLVED] New kernel 3.14.21 PAE for Dreamlinux 5 and Debian Wheezy
location: linuxquestions.com - date: May 12, 2014
New kernel 3.14.2-1 PAE with Debian patches for Dreamlinux 5 and Debian Wheezy. Build the packages with GCC 4.7.2 (Debian 18.104.22.168). For use on PCs with Intel Pentium Pro/II/III/4/4M/D, Xeon, Celeron, Core, Atom, AMD K6, Geode LX/NX, Athlon (K7), Duron, Opteron, Sempron, Turion or Phenom and other. Support multi-processor, multi-core or hyper-threaded systems.
Link: http://www.mediafire.com/download/a6...pae_1_i386.deb (linux-image)
Link: http://www.mediafire.com/download/hs...pae_1_i386.deb (linux-headers)
Link: http://www.mediafire.com/download/3z...nux-pae.tar.xz (linux-source with config)
Link: http://www.mediafire.com/view/3yy0gu65mo4711f/config (config)
PTP error in gphoto2 running against Linux kernel 22.214.171.124
location: linuxexchange.com - date: September 29, 2014
In the hope that there is a gphoto or Linux kernel guru hanging around out there I am asking this question here.
I am trying to build a custom front end to the Linux libgphoto2 library. For the moment I am using gphoto2 to call into the library. I am running this on an Etch (Debian 4.0) VM image as my testing machine. I pulled the source from the gphoto-suite svn repository trunk and built it without problems. I just built the libgphoto2 and gphoto2 portions of the suite because that is all I need. When I try to connect to my camera (Canon EOS Rebel XTi) I get a PTP error and then a message that says "An error occurred in the i/o library ('Unspecified Error')." I found some references to a bug that seemed similar in relation to libgphoto2 scattered across several Linux distros with several different kernels. The most recent one seems to be in 2.6.28 specifically declared to be a kernel bug by the gphoto-suite team. References here and here
I have gotten this library to work with this
Got wpc54g (no version) with redhat enterprise 3 kernel 2.4.21 to work...
location: linuxquestions.com - date: June 16, 2005
To get linksys wireless WPC54G (NOT VERSION 4 OR OTHERS)
working on Red Hat Enterprise Linux 3
kernel 2.4.21_4 (may work on 2.4.21 XX)
NEEDED ndiswrapper vrsion 9 since I had old kernel and new
ndiswrapper won't work with 2.4* kernel.
Many thanks to this forum to put all this together from various sources.
Also take a look at:
1) Need to d/l the following (both can be found on sourceforge.net):
R76521na.EXE (see below for WEP/WPA authentication)
except from sourceforge.net:
Card: Linksys WPC54G, 54mbps -- link here
Chipset: Broadcom BCM94306
Driver: ftp ftp.linksys.com/pub/network/WPC54G_driver_utility_1.3.1.zip
Other: Works with WEP and WPA with either CCMP/AES or TKIP ciphers. Scott says: Unzip the EXE file, and use the driver in the AR directory. Random cases of not being able to probe the IRQ, see the card, connect, e
upgrading from kernel 2.4.21 to 2.4.28
location: linuxquestions.com - date: May 8, 2006
I have Red Hat Enterprise Linux installed (AS 3), kernel version 2.4.21. I want to upgrade to version 2.4.28
I've downloaded the 2.4.28 tgz file and I've been reading thru the documentation. I meet all the minimum required versions for gcc, makefile, etc.
I unzipped it to a temp directory, then I ran
At the end of running make install, I got this:
depmod: Can't open /lib/modules/2.4.28/modules.dep for writing
/lib/modules/2.4.28 is not a directory.
make: *** [install] Error 1
make: Leaving directory `/root/linux-2/linux-2.4.28/arch/i386/boot'
make: *** [install] Error 2
The instructions say this:
In order to boot your new kernel, you'll need to copy the kernel image (found in .../linux/arch/i386/boot/bzImage after compilation) to the place where your regular bootable kernel is found.
I went to /etc/lilo.conf.anaconda and I edited it. Here's what it said:
[SOLVED] Intel HD Graphics 4000 Needed kernel upgrade
location: linuxquestions.com - date: June 24, 2012
Hello all, I just bought a new laptop and long story short I needed to upgrade the kernel to 3.4.4 to have a usable system.
System76 Gazelle Professional Laptop
3rd Gen Intel Core i7-3720QM Processor (2.60 GHz 6MB L3 Cache)
Intel HD Graphics 4000
8 GB Dual Channel DDR3 SDRAM at 1600MHz
750 GB 7200 RPM SATA II
Intel Centrino Advanced-N 6235 - 802.11A/B/G/N Wireless LAN + Bluetooth Combo
It came pre-installed with Ubuntu 12.04 LTS 64 bit. My goal is to get Slackware up and running on it. I installed Slackware64-current (Sat Jun 16 16:19:36 UTC 2012) using a USB boot stick and external hard drive with no problems.
First problem: Unable to boot using KMS. The beginning of the boot process works (I can see text flying by), but as soon as the screen is resized the display goes black and occasionally flashes.
Solution: Boot with the "nomodeset" parameter. I'm even able to startx from here to start KDE. This works for both generic and huge kernels.
Page: 1 2 3 4 5 6 7 8 9 10