No networking after replacing network interface card (NIC) ubuntu 8.04
location: ubuntuforums.com - date: May 21, 2008
I've just upgraded to ubuntu server 8.04 LTS and all was well untill i decided to upgarde my NIC.
After replacing my network card there was no networking anymore.
I put the old card back in and the network worked again.
After much research i found the solution:
There is /etc/udev/rules.d/70-persistent-net.rules which lists the old MAC as eth0 and prevents the new card from becoming eth0.
There is /etc/network interfaces that lists all the eth intefaces generated so far (up to eth1) as "iface ethx inet dhcp".
Basically when ubuntu is installed it creates a link between the NIC MAC address and eth(x) and when a new NIC is installed the MAC address is associated with the next free eth(x) so eth0 (first card) now becomes eth1 (new card)
If you want the new card to become eth0 you need to edit /etc/udev/rules.d/70-persistent-net.rules Delete all the old rules then reboo
libGL.so.1: cannot open shared object file: No such file or directory
location: ubuntuforums.com - date: October 19, 2008
Hello. I recently have been having a problem with a few of my programs. Whenever I click on these select programs, nothing happens- that is, the program won't start.
In an attempt to find the issue, I tried running these programs from the command line, and they all yield the same error message:
glxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
Does anyone have any idea what the problem is, and/or how I can fix it?
I am running Xubuntu Hardy. My graphics card is an ATI Radeon 9500.
Thanks in advance!
problems installing new network interface dhcp ok but no active connection
location: ubuntuforums.com - date: May 16, 2009
Hi, i am running ubuntu 9.04 as a file server at home, i recently got a gigabit router and soon realised that my servers onboard eth was not gigabit, d'oh!
so i have got a gigabit eth adapter, pci slot one and plugged it in, rebooted, and added it to my /etc/network/interfaces file as follows remembering to restart network after:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
iface lo inet loopback
# The primary network interface
iface eth0 inet static
#The secondary network interface (10/100/1000)
iface eth3 inet dhcp
now when i hot-swap the ethernet cable it does dhcp to my router, the MAC is assigned an ip in the dhcp table. However it does not appear in the 'active clients' list and i am not
Debian network interface goes down after no internet activity
location: ubuntuforums.com - date: October 17, 2008
I just installed Debian Etch on two different servers for a basic LAMP setup. On BOTH servers the network interface shuts off after a few minutes. I have to log into the server directly then send out internet traffic in some way for it be back on the network and after a couple of seconds the outgoing traffic will work.
- I will have an active SSH connection with either server
- I'll stop working on the server for a few minutes
- when I try to continue working on the server, the connection will be down completely
- I log into the server directly
- run apt-get update
- nothing will happen for a few seconds (as if it is not on the network)
- then it works perfectly and I can SSH to it again
My only solution so far is to ping the default router every 5 minutes continually.
No graphical interface after upgrading
location: ubuntuforums.com - date: August 4, 2012
I realize it is not very clever, but I took the risk to upgrade to 12.10 by setting de sources list in my 12.04 to quantal using de sed command. On restarting it automatically switches on tty1. No way to get to the GUI.
I acted very impulsively out of anger because there was something wrong with the extra-driver for ati that no longer did the job. I thought upgrading would fix it. (I suppose I had too many beer!)
Stupid fool that I am, I even forgot to save my stuff first.
What can I do to recover my valuable stuff? Or is there a way to get the GUI back?
[SOLVED] libpangox1.0.so.0: cannot open shared object file: No such file or directory
location: linuxquestions.com - date: November 22, 2013
Hi all, when I work from home I have to use the Cisco AnyConnect VPN client. When I was running 14.0, it worked as expected. Since upgrading to 14.1, I get the above error when I try to connect.
Here are the pangox libs that I do have:
[finished] No graphical interface (stops booting at: "starting timidity alsa midi emulation")
location: linux.com - date: March 15, 2012
Alright, I did it. ;)
My Kubuntu doesn't load the login screen or the graphical interface anymore but stops booting when it prints "Starting TiMidity++ ALSA midi emulation... [ OK ]".
However, I can't tell exactly which action has caused this:
Before some parts of my workspace have crashed and restarted, and afterwards the workspace was rather slow.
Yet before I restarted the system, I've also changed the owner of the folders /var and /etc to root (stupid idea? ^^) in order to fix another problem (message was sth like "... is owned by uid 1000, should be 0").
So I was wondering now, if there's a way to fix this problem without a complete reinstallation.
Thanks in advance and just ask if you think you need to know some more things. :)
libtermcap.so.2: cannot open shared object file: No such file or directory
- date: August 12, 2004
Running a program get this error.
ch: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory
However, libtermcap.so.2 is present.
# ls -l /lib/libtermcap*
lrwxrwxrwx 1 root root 19 Aug 12 10:03 /lib/libtermcap.so -> libtermcap.so.2.0.8
lrwxrwxrwx 1 root root 19 Aug 4 13:48 /lib/libtermcap.so.2 -> libtermcap.so.2.0.8
-rwxr-xr-x 1 root root 15320 Aug 12 10:03 /lib/libtermcap.so.2.0.8
I tried linking libtermcap.so.2 with libncurses.so.5, but still
Linux version 2.6.7-gentoo-r11 ([email protected]
) (gcc version 3.4.1 (Gentoo
Linux 3.4.1, ssp-3.4-2, pie-188.8.131.52)) amd64
libXft.so.2: cannot open shared object file: No such file or directory
location: linuxquestions.com - date: June 25, 2012
I'm trying to run PGCedit, but i'm getting into problems doing so:
[SOLVED] libdnet.1: cannot open shared object file: No such file or directory
location: linuxquestions.com - date: October 15, 2013
I am using Unbuntu 11.4. (No newer version of Ubuntu works on this old desk top.) I decided to build the latest version of Snort on this server. Ubuntu does not support "sudo apt-get install" for the latest version of Snort since this version of Ubuntu is no longer supported. Hence I downloaded a tar ball and build Snort with ./configure and make. Now it cannot find a shared library when I try to run snort. These are the messages I get.
Page: 1 2 3 4 5 6 7 8 9 10