Rendering in Fusion 360 with virtualbox [on hold]
location: linuxexchange.com - date: January 11, 2016
I have installed Autodesk's Fusion360 on a Windows virtual machine running onto an Ubuntu host. It all works fine except for rendering: all textures are rendered in a random colorful way.
For instance, on a classical windows machine this piece is rendered nicely with a grey aluminium texture, but on the virtual machine I get this:
I guess this is related to the way graphics are handled by the virtual machine. I followed the instructions of this thread, and installed the guest additions + direct3D support on the virtual machine, but I could not get the rendering to work properly.
I have not tried PCIe passthrough yet, but it seems a bit overkill and as there is no guarantee that it solves my problem I would like to find an easier solution.
Did anyone faced this kind of problem before ? Does anyone have an idea of what I could try to solve it ?
Asus X99E-WS motherboard with 64Gb of RAM
ZOTAC GeForce GTX TITAN X graphics card (NVidia driver 352.63)
XP Ubuntu dual boot with VirtualBox?
location: linuxquestions.com - date: December 18, 2008
I've used Linux before (Ubuntu, and breifly Fedora). I used to have a dual boot setup between XP and Ubuntu. However, it got very annoying moving between Windows and Linux all the time just to use certain programs, struggling to make games work in WINE, and just juggling between them in general. It's also very annoying that half my files are on one partition, with one OS, and the rest are on another partition with another OS. So I just went back to windows.
Recently, I'm considering giving it another try. I'm also a programmer, and I like Linux for carrying out these types of tasks.
However, there are some problems I'd need to address. I've searched and googled these, let me know if I'm not looking carefully enough:
- I want to use VirtualBox to boot the EXISTING XP partition. This is a must. However, I've heard that running a real partition in a virtual machine can cause problems. For instance, I'm told that if something modifies the partition while VirtualBox is "suspen
Backups of Xbox 360 with K3b
location: ubuntuforums.com - date: September 2, 2009
I've just registered and this is my first post. I hope this is the correct place for this question, otherway, please let me know and sorry ^^
My problem is:
I've been trying to burn Xbox 360 backups with K3b because I read it was extremely easy. And of course it is, I changed the preferences adding "-use-the-force-luke=break:1913760" at the growisofs line, but when I try to burn this is what I get:
K3b Version: 1.0.5
KDE Version: 3.5.10
QT Version: 3.3.8b
Optiarc DVD RW AD-7560S SX07 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R secuencial, DVD-R Doble capa secuencial, DVD-R doble capa salteado, DVD-RAM, DVD-RW sobreescritura restringida, DVD-RW secuencial, DVD+RW, DVD+R, DVD+R doble capa, CD-ROM, CD-R, CD-RW] [SAO, TAO, En bruto, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Sobrescritura restringida, Salto
Bonded NICs with VirtualBox bridge
location: ubuntuforums.com - date: July 15, 2011
I've searched, and I really have, but haven't come up with any forums posts or google results on this issue. Perhaps I've been searching for the wrong thing, and I apologize if there is.
I've setup a Ubuntu 10.04 LTS box with 3 NICs bonded and VirtualBox 4.0.10 with a couple VM's bridged to bond0. The problem is, I'm getting spotty connections. I've tested the VM host to make sure the bonding is configured correctly and works(seems good) with no dropped packets. I have also removed the NetworkManager as per suggestion.
# The loopback network interface
iface lo inet loopback
# Bonding for eth0 eth1 eth2
iface bond0 inet static
post-up ifenslave bond0 eth0 eth1 eth2
pre-down ifenslave -d bond0 eth0 eth1 eth2
I currently have 3 VM's I'm running to make sure I get it setup right. 2 are running Ubuntu 10.04 servers and the 3rd is running WinXP. The 2 *nix VMs are
will running ubuntu through windows host with virtualbox resolve linux driver issues
location: ubuntuforums.com - date: July 9, 2013
Does hardware run through drivers on host or guest os?
i am having power and cpu and fan issues with linux and wondering whether im best running through windows host
Problem with VirtualBox bridge connection on Ubuntu 12.04
location: ubuntuforums.com - date: May 1, 2012
Asus ZenBook UX31eUbuntu 12.04 x64 (Linux AexChecker-UX31E 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux)VirtualBox 4.1 (4.1.12_Ubuntu r77245)Windows 7 Ultimate in VirtualBox
I need connect to VPN from Windows, and for this I use bridge connection in network settings in VirtualBox. But when I run Windows and log in, my machine freezed (crashed/broked) and I can't get any feedback from it. I tried to set NAT connection, and Windows work fine with it, but don't work VPN conection.
Help me with VPN in Windows in VirtualBox, please.
Pashto fonts rendering problem solved with Ubuntu
location: ubuntuforums.com - date: November 2, 2009
Rendering Pashto fonts in ubuntu is a big problem in linux as well as Ubuntu , I have faced to many problems while I was working with Pashto fonts, and I have googled alot to solve this problem , but unfortunately I have found nothing and considered that many people have the same problem as I.
So finally I have decide to work on this problem and after a long time trying finally I got the way how to solve this problem
By this Thread the Pashto special 8 characters fonts related problem has been totally solved and all Pashto characters are nicely visible in Linux.
Click one of the links below to get the archived file of all necessary pashto fonts, Extract the archived file in /usr/share/fonts directory and then type the following command in the terminal for granting permission:
sudo chmod –R 755 /usr/share/fonts
Now you should have well displayed Pashto fonts in your texts and applications.
Below link contains just Pashto fonts package and should
Wireless USB problem in Ubuntu with VirtualBox vm
location: ubuntuforums.com - date: January 10, 2013
Hello Ubuntu Forum,
Does anyone know how to get TP-Link TL-WN722N wireless USB adaptor working in Ubuntu with VirtualBox as the virtual machine running Ubuntu?
This adapter works fine in Ubuntu when using VMware as the virtual machine, but fails to work when using VirtualBox. Any suggestions?
When I do a lsusb i get this:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Device 002: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
but when I do a ifconfig, wlan0 wont show up.
Doing an ifconfig wlan0 up shows this:
:~$ ifconfig wlan0 up
wlan0: ERROR while getting interface flags: No such device
and a iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
Computer Set-up Info:
Virtual machine: VirtualBox 4.2.6
Guest OS: Ubuntu 12.04.1 LTS
Host OS: Mac
Re: Boot an existing XP (Physical HD) install with VirtualBox
location: ubuntuforums.com - date: April 27, 2008
HowTo for Vista 1,2
I made this tutorial because I have been searching for an open source virtualization solution. I've tried VMware, but didn't like the GUI (it felt too slow) and the fact that it was closed source. Virtualbox was more appealing because it is open source and because it doesn't currently require a hack to get running in Hardy. After tons of research, I've found that the solution couldn't be simpler.
Please read or skim the tutorial before attempting it. Note: This tutorial was tested to work with VBox 1.6 and may not work for users w/ SATA drives.
Step 1: Create a grub boot cd
Creating a grub cd will let you boot straight into your target Windows partition.
Following method adapted from grub manual.
cd ; mkdir -p iso/boot/grub ; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub
Configure /home/you/iso/boot/grub/menu.lst to boot your target partition. Remove the "savedefault&q
TIP: Using your cellphone as a modem with VirtualBox.
location: ubuntuforums.com - date: February 13, 2008
This tip will quickly cover how to use a working bluetooth connection and VirtualBox to get internet access to your laptop or PC from your cell phone. I have a great need of this and as of yet I still haven't found anything working in Ubuntu or Linux in general for this purpose.
For the moment this is just a tip and I'll write a complete howto for this later if anybody is interested and after I have sorted out internet sharing with a virtual box!
What you need in order for this to work:
A fairly modern cell phone that at least supports GPRS and that can be synced with your computer in Windows.
Colemanvt, has already gone to GREAT lengths to write a detailed HowTo so I won't re-invent the wheel. Please go here to read his HowTo:
Now that you have Virtualbox installed and running with a complete install of Windows XP SP2, or any version of windows that will support your phone and hardware, we can continue.
Page: 1 2 3 4 5 6 7 8 9 10