Backup Restore Failed: Error splicing file: input/output error
location: ubuntuforums.com - date: January 28, 2013
as in the title...im restoring a previous back and i am getting this error that stops the whole restoring. is there a way to solve it, or force restoring the rest of the files?
i am using deja vu, the default utility on ubuntu
[SOLVED] mdadm error replacing a failed disk
location: linuxquestions.com - date: October 22, 2011
Hi Helpful Ubuntu Folks,
I have a four disk mdadm RAID5 on which one of the disk failed. The disk just completely died and was not visible by the OS. I powered down, took the disk out, restarted and left the array unstarted. I then bought a new disk and I'm now trying to add to the array and get the array back on its feet.
Here is what the "detail" command tells me:
excession# mdadm -D /dev/md127
Version : 1.2
Creation Time : Sun May 29 18:32:22 2011
Raid Level : raid5
Used Dev Size : 1465137152 (1397.26 GiB 1500.30 GB)
Raid Devices : 4
Total Devices : 3
Persistence : Superblock is persistent
Update Time : Fri Oct 21 22:26:06 2011
State : active, degraded, Not Started
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 512K
Name : excession:0 (local to host excession)
UUID : 557a3ef8:14251ba9:d4aa50ac:bd9b7d5c
Events : 136609
Number Major Minor RaidDevice State
0 8 0
[SOLVED] xend ERROR POST operation failed: xendpost: error from xen daemon: <Fault 3:>
- date: August 30, 2012
I am trying to install and setup xen in ubuntu 12.04 arch i686. I have followed the steps mentioned in the following link:
I have isntalled xen and followed the step mention in the link to configure libvirt with xen. However, when I try installing a new xen VM using the command virt-install, I am getting following error:
ERROR POST operation failed: xend_post: error from xen daemon: <Fault 3: ''>
My xen and virsh configuration info are pasted below:
:~# xm info
host : xen1
release : 3.2.0-23-generic-pae
version : #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012
machine : i686
nr_cpus : 4
nr_nodes : 1
cores_per_socket : 2
threads_per_core : 2
cpu_mhz : 2933
hw_caps : bfebfbff:28100800:00000000:0000
ubuntuserver 12.04.2 installation error: package retrieval failed
location: ubuntuforums.com - date: February 22, 2013
i tried to install
ubuntu server 12.04.2 amd64 with unetbootin.
the install via unetbootin on a flash drive failed because a file could not be retrieved from the flash drive.
the file is:
i checked and listed /cdrom/pool/.... and found that the file was there but the last character of the filename was missing; i.e. the listed file just read
is the filename too long or what is happening?
(CRON) error (grandchild #11934 failed with exit status 127)
location: ubuntuforums.com - date: May 17, 2011
I solved this cron issue in ubuntu.
This cron job line will have error 127 in ubuntu server 11.04.
* * * * * root /bin/date > /var/log/date.txt
May 17 12:34:01 gw1 CRON: (root) CMD (root /bin/date > /var/log/date.txt)
May 17 12:34:01 gw1 CRON: (CRON) error (grandchild #11934 failed with exit status 127)
May 17 12:34:01 gw1 CRON: (CRON) info (No MTA installed, discarding output)
May 17 12:34:01 gw1 CRON: (root) CMD ( /bin/date > /var/log/date.txt)
This cron job line will NOT have error 127 in ubuntu server 11.04.
* * * * * root cd / ; /bin/date > /var/log/date.txt
May 17 12:38:01 gw1 CRON: (root) CMD (root cd / ; /bin/date > /var/log/date.txt)
May 17 12:38:01 gw1 CRON: (root) CMD ( cd / ; /bin/date > /var/log/date.txt)
May 17 12:38:01 gw1 CRON: (CRON) info (No MTA installed, discarding output)
The file in /var/log/date.txt generated successfully with t
Error 204 Authentication failed with Freenx/Nomachine
location: ubuntuforums.com - date: November 14, 2012
I am getting the typical 204 authentication error when attempting to use Nomachine/Freenx to connect to either local computers here in the office or outbound ones at other sites.
I'm attempting to use SSH authentication through a central server "hadrian".
NX> 203 NXSSH running with pid: 4285
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 192.168.2.68 on port: 6235
NX> 202 Authenticating user: nx
NX> 208 Using auth method: publickey
NX> 204 Authentication failed.
Am I doing something wrong here? My understanding is that Nomachine can do normal SSH authorizations with no password needed by simply reading the /home/USER/.ssh/authorized_keys file.
Is there something else I need to do to make this work?
server does not boot: I/O error; cciss TUR failed in CCISSGETLUNINFO
location: ubuntuforums.com - date: October 2, 2012
i have a server with ubuntu precise installed. up to now it booted perfectly well but after the last upgrade it does not anymore.
during the boot process i see error messages like
- end_request: I/O error, dev dm-0, sector 123456
- Error: inappropriate ioctl for device
- cciss TUR failed in CCISS_GETLUNINFO: inaproppriate ioctl for device
the server boots and i see the login prompt. when i enter the username and hit 'return', i see several end_request error messages and get a fresh login prompt. i can not log in!
the filesystem is ok; i can boot into the rescue mode without any problem.
i also booted with a live system (i use FAI and can log in via ssh). i checked all the filesystems and they are ok.
i saw a similar post but without any answer.
any ideas how to fix this?
error: mail command failed for /var/log/squidguard/squidGuard.log.6
- date: January 23, 2005
I have a cron job to rotate my squidguard.log and mail it to my e-mail address. But seems like there is a problem in the mailing procedure. Also I set rotate 5 but the rotation of squigguard reached squidguard.log.6
Below is my configuration for /etc/logrotate.d/squidguard:
mail [email protected]
And the error message when I did a "# /usr/sbin/logrotate -f -s /var/lib/logrotate.status /etc/logrotate.conf
error: mail command failed for /var/log/squidguard/squidGuard.log.6
I am not sure why it rotates till squidguard.log.6 because I thought if I set "rotate 5" it should rotate the log files to no5.
Please help me with this,
thanks a lot
[SOLVED] Print error : "foomaticriphplip failed"
location: linuxquestions.com - date: February 23, 2011
I've installed a fresh zenwalk 7.0 RC 2. Everything is fine, but I get an error message when trying to print with my HP Laserjet P1102w:"/usr/lib/cups/filter/foomatic-rip-hplip failed".What to do?
ERROR : read manifest failed: Success
location: linuxquestions.com - date: April 8, 2004
I am getting the following error when given the command
#rpm -Uvh openssl-0.9.6b-36.i386.rpm
openssl-0.9.6b-36.i386.rpm: read manifest failed: Success
OS flavor : Redhat 2.1 AS
Kernel : 2.4.9.-e.38
could you please suggest the meaning of this error ?
Page: 1 2 3 4 5 6 7 8 9 10