XBMC 12 released – includes Raspberry Pi and Android support
location: linuxquestions.com - date: January 31, 2013
XBMC 12 released – includes Raspberry Pi and Android support;
File share between Raspberry Pi and Ubuntu Running a script Page 2
location: linuxquestions.com - date: June 12, 2013
here is a check list for you.
On the Laptop:
1. ensure the external HDD never goes to sleep (can wind down in RPMs, but not disconnect from laptop.
2. configure sshd.conf to allow for keys for authentication.
3. Optional: setup and configure NFS to share the external HDD via your LAN.
On the RPi:
1. create rsa key to what ever level of encryption you wish, i personally use 4096.
1a. cd ~/.ssh
1b. ssh-keygen -t rsa -b 4096
1c. follow directions on screen, DO NOT PUT IN A PASSPHRASE as this will be for unattended authentication.
2. create script to rsync XYZ data to your laptop (by doing this there is zero reason to have a mount point or use sshfs)
3. after the rsync is complete, you can rm -rf the data on the local SSD to ensure you do not run out of space.
that is unless you wish to store the data on the external HDD instead of the SSD on the RPi. If that is the case, then NFS is the best way to go and skip sshfs completely. if you are worried about the data bei
Connecting subnets with Raspberry Pi wireless access point
location: linuxquestions.com - date: July 23, 2013
So, I am using a Raspberry PI Model B (256) with the latest raspbian image as a wireless bridge for an entertainment center with an ethernet port. The Pi connects to the LAN wirelessly and the eth0 port is "shared with other computers" via NetworkManager.
From ps aux | grep dnsmasq, I see that dnsmasq (apparently started by NetworkManager) provides an IP of 10.x.x.x to the entertainment center. The LAN has the usual 192.168.x.x IP space, provided via DHCP from a router.
So far so good, the entertainment center can get internet radio and connects to the internet. From the Pi, I can ping the entertainment center and anyone on the LAN.
But I cannot ping the entertainment center from anyone else on the LAN. What I would like is to drop the NAT on the Pi so that the entertainment center is visible to the entire LAN. Any ideas?
There are google results for achieving this result for various routers, but I'm not sure how to do it with the Pi/using debian an
ubuntu and Raspberry Pi
location: ubuntuforums.com - date: June 14, 2013
I just don't know where else to ask this, so if it needs to be moved please do so.
I know Raspian on the Raspberry Pi is Debian based, and since Ubuntu is also Debian based, I was wondering if there is a version of Ubuntu that runs on the Raspberry Pi and it's architecture (Armtel or some such thing). I don't have a problem using Raspian, since the look and feel is pretty much the same, but wouldn't mind if I could just stick with Ubuntu all the way around.
As a side note, if you don't know what a Raspberry Pi is, you should research them on the net. Very inexpensive, very small, and they make a nice little media center when XBMC is installed.
Ubuntu on a Raspberry Pi
location: ubuntuforums.com - date: April 16, 2013
I'm in the process of developing my Raspberry Pi.
Has anyone out there tried to load Ubuntu and how did it go?
I'm hoping eventually to have a small, hand-held, Powerpoint player using perhaps Kingsoft Powerpoint and the HDMI output.
Ubuntu 12.04 (or newer) on a Raspberry Pi
location: ubuntuforums.com - date: July 3, 2013
Is it possible to put Ubuntu/Kubuntu 12.04, or later, on the raspberry pi?
I know that 9.04 would run, so could I pull its kernel out and put it in 12.04, or would that just screw things up?
If it would work please leave steps (I've only been using Ubuntu/Kubuntu for 4 Months and am still a nube).
why there is no Ubuntu version for Raspberry Pi
location: ubuntuforums.com - date: June 26, 2013
I have tried both Debian and Fedora on raspberry pi and they are running great . Still waiting to hear from Ubuntu
13.04 samba, raspberry pi wheezy samba colliding?
location: ubuntuforums.com - date: July 2, 2013
I have a little zbox with ubuntu 13.04 on it that I'm using as a small desktop and Samba server. It has been working fine.
I also have (1 that I'm working with) a Raspberry Pi running Wheezy (debain based) that will be a media center and have Samba running as both a client and server as well.
By itself, the zbox works fine as the samba server. When I bring up Samba on the Raspberry Pi, It's like the 2 "collide" or something as I end up with both being screwed up (get can't accees share just trying local lookup on the zbox). I was wondering if there is a problem with having 2 linux samba servers and no Windows boxes on the same subnet - something with name resolution or the like.
I'm just a little stuck at this point. I want them both to be servers so that the Pi can (1) see media files on the zbox & (2) so that other PC's can read/write media files on the Pi.
I hope that explains enough for someone to consider helping me.
ubuntu as server for raspberry pi's running xmbc by each tv
location: ubuntuforums.com - date: May 29, 2013
Wondering if anyone has some thoughts on using an Ubuntu box as some sort of server with music, video and pictures so that I could have raspberry pi's running xmbc by each TV in the house and them to have access of this central server of some sort? Would I need some sort of database so the pi's would be able to access the titles?
Raspberry Pi finally released
location: ubuntuforums.com - date: February 29, 2012
official site: http://www.raspberrypi.org/
Page: 1 2 3 4 5 6 7 8 9 10