[SOLVED] ACPI conflict
location: linuxquestions.com - date: November 1, 2010
I'm having some problems with Debian Squeeze. Starting the boot, I get the message:
[ 4.642060] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 4.642107] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Anyone have a solution for this?
[SOLVED] ACPI Error [DSSP] Namespace lookup failure AENOTFOUND on Slackware 14 64 bit
location: linuxquestions.com - date: February 6, 2013
I have Gigabyte GA-B75M-D3V rev 1.1 motherboard with F10 BIOS.
I've got this error on my fresh Slackware 14 x64.
[SOLVED] ACPI errors when booting
location: linuxquestions.com - date: February 3, 2012
I have just completed my first Linux From Scratch system. When I boot into it from Grub2, I see a lot of startup-related messages flash across the screen. Then, I see this at the bottom of the screen:
[SOLVED] ACPI related kernel (2.6.34) freeze on Nehalem/Westmere CPU, on a SuperMicro MB
location: linuxquestions.com - date: October 12, 2010
I have seen some really weird freeze of kernel from 2.6.32 to 2.6.34 on Westmere
CPUs. The exact cause (CPU, Kernel or Hardware) is not known, so I am going to
list the facts:
** When the crash happens, there is __nothing__ on the console. Not on
video console and not on serial console.
** The said machine has two Westmere CPUs, each with 4 cores. With
hyperthreading, "cat /proc/cpuinfo" will show 16 cores.
** I can usually repeat the crash by copying a couple of terabytes of
date to this machine.
** Adding "acpi=off" in boot parameter list "fixed" the problem, but
that also turns off the HT, so I lose half of the core counts.
** I tried "acpi=ht", which is due to be out in later kernel, it doesn't
work, the machine still crashes. My understanding is that "acpi=ht"
will turn on hyperthreading and the minimum ACPI support to get
hyperthreading supported. But that doesn't seem to be good eno
[SOLVED] ACPI: I/O resource piix4smbus [0x10400x1047] conflicts with ACPI region SMB [0x104
location: linuxquestions.com - date: December 13, 2011
I have seen a few of these threads, so I wanted to share what worked for me. This initially appeared to be a "driver" issue, however I found that this was nothing more than a mounting issue! I had this error after one of my servers found in fstab was disconnected. It seems when the system booted and read my fstab file, the mount point I had created was no longer valid.
The solution to remove this error: simply double-check your fstab for mount points that are no longer valid or have errors. In my case it was just removing/commenting out the entry. Once you have corrected, reboot and you'll notice no more udev error.
[SOLVED] ACPI ERROR [DSSP] Namespace lookup failure Desktop locked up
location: linuxquestions.com - date: May 23, 2014
My system locked up yesterday. Hard shut down was the only option--
I (think) it was a script on the wallpaper page I was on that caused it-
I found 2 errors in the dmesg log and wondered if installing the AMD Open Source driver is the answer? Or is this a BIOS issue?
Static kernel nForce and ACPI conflict
location: ubuntuforums.com - date: April 3, 2010
I'm unable to use my "builtin" forcedeth (nForce ethernet card) driver because it conflicts with some of my "builtin" ACPI features. Anybody know what that is so that I don't need to test?
└┌(%:~)┌- dmesg |grep Force
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
i2c i2c-0: nForce2 SMBus adapter at 0x600
ACPI: I/O resource nForce2_smbus [0x700-0x73f] conflicts with ACPI region SM00 [0x700-0x73f]
nForce2_smbus 0000:00:01.1: Error probing SMB2.
[SOLVED] acpi=off or apci=off or apic=off or...? What the...?
location: ubuntuforums.com - date: May 13, 2008
There seems to be quite a bit of confused advice floating about. I hope someone knowledgeable can clear this up.
Many people have problems with booting from Live CDs, and the advice on how to clear it up almost always involves adding a parameter to boot options. I'm new to this, and I don't really understand what this is all about. But matters are made worse by the fact that the advice is inconsistent. I've seen each of the following variants offered as advice:
So what gives? Obviously, there is some confusion, here. Which of these is correct?
[SOLVED] ACPI ERROR [DSSP] Namespace lookup failure Desktop locked up Page 2
location: linuxquestions.com - date: June 9, 2014
I'll help you as much as I can ZT but read all the documentation regarding flashing the bios, they have a users manual on that page you linked me to, Pull it down and take a look, make sure you have a plan before you start.
AFL has a point, never walk into this kind of thing without knowing what the hardware is expecting you to do. I'd rather help you with the manual than help you recover from a bad flash.
[SOLVED] How serious is this conflict? ACPI: I/O resource... conflicts with region SMBI
location: linuxquestions.com - date: October 27, 2010
Maybe I'm not asking "google" the right questions but I haven't been able to get an understanding of what this means and what the potential ramifications are. I finally convinced my boss to go fully-Linux and of course, within hours I was flooded with "come take a look at my machine" calls.
Toshiba laptop A205 -> Debian "Lenny" - 2.6.32-backports kernel (about 2 yrs old)
Toshiba laptop L655 -> Debian "Squeeze" 2.6.32 stock kernel and 2.6.36 compiled kernel (brand new machine)
I've compiled 2.6.36 kernel with settings targeting this machine and just a generic compile of 2.6.36. Conflict remains.
Both have latest BIOS.
Both machines have this in "dmesg":
Page: 1 2 3 4 5 6 7 8 9 10