[SOLVED] Serious Problem With UBUNTU 10.10 Install
location: linuxquestions.com - date: March 7, 2011
The problem i am having is this:
I am installing Ubuntu Server 10.10 on a server I have just purchased. The dificulty I am having is that it has been installing for 4 days now. I have an intel atom, 1 gb ddr2 RAM, and a 1TB Hard drive. The setup went ok at first, but during the partitioning, it was stuck at 33% for just under 15 Hours on the partition ext4. once it finally got past that it was stuck at 78% for 3 more hours after that it seemed ok but then when it got to 'select and install software' it has been stuck at 5% for 2.5 days now. then about an hour ago, the disk drive started spinning like crazy, the screen went black (console) and in the top left corner said '~Terminated' then I Got the BIOS and the installer started over. now im back at partitioning stuck at 33%.
What do i do??
[SOLVED] RAID5 broken mdadm unable to restart (Ubuntu 10.04)
location: linuxquestions.com - date: October 6, 2011
Here is my problem :
I created a RAID5 with 6 devices connected on 2 SATA controlers.
SATA controler 1 : sdb + sdc + sdd
SATA controler 2 : sdf + sdg + sdh
SATA controler 1 has been unfortunately disconnected form the motherboard.
Now my RAID5 cannot be restarted. Situation is :
[SOLVED] nVidia install problem Ubuntu 8.10
- date: November 19, 2008
I used the System-->Administration--->Hardware and Drivers and install the recommended driver. Upon system Restart I get an error, I am able to switch to a basic mode to view the desktop but can't utilize Visual Effects at all. Any help would be appreciated.
Her is the :0.log
xinit /etc/gdm/failsafeXinit /etc/X11/xorg.conf.failsafe with-gdm -- /usr/bin/X :0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7 -br -once -config /etc/X11/xorg.conf.failsafe -logfile /var/log/Xorg.failsafe.log
X: warning; process set to priority -1 instead of requested priority 0
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux joseph-desktop 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686
Build Date: 24 October 2008 08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 ([email protected]
Before reporting problems, check
[SOLVED] Google Earth and Ubuntu 10.04 Dell 1545n laptop
location: linuxquestions.com - date: September 28, 2010
Google Earth runs with no problems on my Slackware box. Download the binary, chmod the executable flag, run the installation, bing, bang, boom.
I have not yet gotten it to run on my Dell 1545 Ubuntu v. 10.04 laptop (Celeron 2.16 GHz 2 GB RAM). With Google Earth v. 4, the best I could do is to get it to run once. Then it would not run again: the program would start, but would stop before the picture of the earth loaded from the Google server.
After installing Google Earth v. 5 successfully on my Slackware desktop yesterday, I tried again. Both computers are connecting through the same router; the Slackware box is wired, the Ubuntu is wireless.
After the installation routine finished, it presented me with the option to start the application immediately. I clicked "Yes" and the installation dialog window went away, then nothing happened.
I tried running it from a terminal as root and got an error that GLIBCXXX.3.4.9 was missing.
I found this link which sugge
[SOLVED] Trouble upgrading from Ubuntu 10.04 to 10.10
location: linuxquestions.com - date: January 8, 2011
Hello, I am running ubuntu 10.04 on an emac powerpc. I go to the update manager and click on 'Update to Ubuntu 10.10', and then it starts the update and everything goes well until step 2 which is setting new software channels. It displays the error message:
W: Failed to fetch httports.ubuntu.com/ubuntu-ports/dists/maverick/Release Unable to find expected entry partner/binary-powerpc/Packages in Meta-index file (malformed Release file?)
,E:Some index files failed to download, they have been ignored, or old ones used instead.
So if someone could help me out that would be great, thanks for your time.
Edit: above it displays a smiley face because I had : and p together...sorry it is supposed to be : p (no space) not a smiley face
[SOLVED] For dual booting Ubuntu 10.04 with Windows 7, which partition process to use?
location: linuxquestions.com - date: August 3, 2010
I am wondering is it safer to resize the partitions using the windows 7 device manager or use the Ubuntu GPart program to do it?
[SOLVED] For dual booting Ubuntu 10.04 with Windows 7, which partition process to use? Page 2
location: linuxquestions.com - date: August 8, 2010
Ok I ran into a problem now, I updated Ubuntu now and the updated kernel has removed the EasyBCD settings for dual booting and now once the system boots up, a cursor flashes in the top right hand corner and then boots straight into Ubuntu without showing any options for booting into Ubuntu or Windows!
Has this problem being fixed yet or are there any solutions to retrieve the original EasyBCD bootloading setup?
[SOLVED] Internet slow in Ubuntu 10.04Firewall Issue?
location: linuxquestions.com - date: July 19, 2010
I am currently using Release Ubuntu 10.04 (lucid)
Kernel Linux 22.214.171.124-generic
My question is: How can I tell if my fire wall is on? The reason I asked this is because My internet is running really slow and choppy.....I have 3.5MBPS but I feel like its Dial-up. I have a New Lap top with 1gig-mem,1.6 processor and 320gig Hd. All your help is very APPRECIATED.
[solved] Installing JRE on Ubuntu 10.04
location: ubuntuforums.com - date: March 30, 2012
I am very new to Ubuntu. I am trying to install JRE on Ubuntu 10.04.
I add the partner repository using the following command:
sudo add-apt-repository “deb http://archive.canonical.com/ lucid partner”
However when I run:
sudo apt-get update
I get the following error:
E: Malformed line 54 in source list /etc/apt/sources.list (dist parse)
Can someone please tell me what's going wrong? It'll be greatly appreciated. Thanks a lot!
[SOLVED] Network connection configuration Ubuntu 10.04
location: linuxquestions.com - date: July 23, 2010
I guess this should come under the title "why can't they leave well enough alone?" Today I had occasion to configure a couple of machines with static IP addresses for some testing. My 8.04 machine - no problem. Invoke network-admin, unlock (with sudo credentials), set the desired IP, netmask and gateway. It is good to go.
On the 10.04 box I did the following:
Right clicked on the network icon in the notification area (nm-connection-editor) - I see Auto eth0 (last used, never). So what have I been using for connectivity since I installed 10.04???
I then select Auto eth0 and press [Edit]. Under the IPv4 Settings tab I change "Method" Manual and enter my settings. However, I cannot Apply the changes - the [Apply] button is grayed out.
So I try the same thing via the menu System; Preferences; Network Connections - same problem the [Apply] button is grayed out.
So then I create a desktop icon to "gksu nm-connection-editor". Now I can Apply my
Page: 1 2 3 4 5 6 7 8 9 10