No ethernet even w/ ethernet cable attached on TinyCore Linux
location: ubuntuforums.com - date: May 28, 2009
I am trying to install Tiny Core Linux as the operating system on my ASUS Eee PC 1000HA. When I booted the operating system, I wanted to test everything out to see if I could be comfortable with the switch. I have experimented with Tiny Core a bit and I know how to install files and whatnot, but here is my problem:
If I wanted to begin installing applications to see how they run on the Eee, I would have to hook up an ethernet cord, and then download the wifi drivers. When I hook up the ethernet cord, it doesn't automatically connect to the network. I went into the control panel and enabled the DHCP Client, and then I went to the appsbrowser and tried to search for a package, but it told me there was no connection, and that I should try later. I tried restarting the Eee and boot up again, this time with the ethernet cable plugged in, but I still get no connection. I tried the DHCP Client again, but noticed that everytime I close out of the window, the DHCP Client resets itself to off
error 71 while connecting USB cable Nokia e50
location: ubuntuforums.com - date: October 12, 2008
Hi all, I found a problem while connecting USB cable to my PB with Ubuntu (it is not a new one, but pen drive can be mounted and works). I can't find any solution to my problem, there is one threat on this forum http://ubuntuforums.org/showthread.php?t=576925
My mobile is OK, cable is also fine (I can connect to Windows and Ubuntu on my laptor, and everything is fine). When I connect to the one I mentioned, I choose on phone PS Suite, but there is no icon for connection on the mobile's screen.
lsusb shows nothing:
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
[ 2331.420511] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 2331.540421] usb 1-2: device descriptor read/64, error -71
[ 2331.764324] usb 1-2: device descriptor read/64, error -71
[ 2331.980219] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 2332.100163] usb 1-2: device descriptor read/64, error -71
[ 2332.324060] usb 1-2: device descriptor read/64, e
Problems with my Ubuntu 9.10 Server and Cable modem Motorola Surfboard
location: linuxquestions.com - date: May 27, 2011
Hello, I have a server which has 3 network adapters. 2 internal or local network and 1 connected to a cable modem Motorola Surfboard provided by my ISP.
The network adapters are all RTL8168b/8111b and are using driver r8169 (2.3LK-NAPI). The system is running a custom kernel 2.6.39 and of course everything works, but once in 2-3-4-5 or even more days the connection between my network adapter connected to the cable modem fully dies, without any error.
Normally you can connect to the cable modem using an ip address 192.168.100.1, but when the connection dies between the network adapter and modem, this ip can't be reached anymore even if the network cable is fine and everything theoretically should work.
The fix in a case like this is to fully reboot the server, nothing works, restart dhclient, the network, putting eth0 (the network adapter connect to the modem) and brining it up again doesnt do anything.
This issue it's happening for at least 6 month and my ISP says it's my f
Two ubuntu machines + crossover cable
location: ubuntuforums.com - date: June 1, 2009
I'm finding it much tougher than I think it should be to connect two ubuntu machines via a crossover cable. Both machines have Jaunty on them although the desktop environment has been removed on one of them. They are connected by ethernet cable. The setup is this:
One machine (the server) is connected to the internet via eth0 and my client PC via eth1.
The client pc only has the one connection to the server (via eth0).
I just want to be able to SSH between them. I tried this:
On the Client
sudo ifconfig eth0 down
sudo ifconfig eth0 up 10.0.0.2
On the Server
sudo ifconfig eth1 down
sudo ifconfig eth1 up 10.0.0.1
but when I try to ping, it tells me that the network is unreachable.
Any help would be great,
Need help getting video from Cable box
location: ubuntuforums.com - date: December 6, 2008
I was using Mythbuntu 8.04 with my Scientific Atlantic 4240HDC cable box with intermittent success. I upgraded to Mythbuntu 8.10 and it has not worked at all. I set up my backend to use all of the related cable box types, point-to-point, broadcast, 100mb and 400 mb, and still can't get any video. Below is an link to an image of the error I get every time and the relevant error log. Thanks for your help.
==> /var/log/mythtv/mtd.log <==
mtd started at Thu Dec 4 18:15:50 2008
mtd is running on a host called mythbox
18:15:50: Waiting for connections/jobs
18:15:50: mtd is listening on port 2442
==> /var/log/mythtv/mythbackend.log <==
2008-12-04 18:17:29.699 LFireDev(001E6B86A1140000), Warning: No Input in 100 msec...
2008-12-04 18:17:29.755 LFireDev(001E6B86A1140000), Warning: No Input in 150 msec...
2008-12-04 18:17:29.815 LFireDev(001E6B86A1140000), Warning: No Input in 200 msec...
2008-12-04 18:17:29.867 LFireDev(001E6B86A1140000)
Cisco 831 Cisco Router and Cable Modem
location: linuxquestions.com - date: June 30, 2008
A friend just purchased a Cisco 831 router and wants to configure his router to grab a ip address from his cable modem and set his lan ports on his router to DHCP. Can someone give me a config file that can do that. thanks
Cox Cable Blocking my Port 80
location: ubuntuforums.com - date: January 30, 2010
So first off, it probably seems this question has been asked thousands of times before . . . but I did do a search, mostly archived posts that ended up being something other than a true ip blocking of the port.
So my port 80 is truly blocked. Ive tried setting up the port forwarding on my router, Ive tried manually allowing all traffic on port 80 through ip tables. Ive even dabbled with setting up something like openDNS to see if that would help.
So far nothing, Im only available on my local network.
There has to be some way to do a redirect though . . . . even something as simple as an htaccess file redirecting http://domain.com to http://domain.com: xxxx (the space is there to avoid my url being interrupted by a smiley . . .
Ubuntu 12.04 Lost connection by wire (cable unplugged)
- date: July 16, 2013
I've been using 12.04 for several months, but now I've lost my wired connection. Status bar says "Wired: cable unplugged". Some outputs:
~ $ ifconfig
eth0 Link encap:Ethernet HWaddr 80:ee:73:2c:58:64
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:77678 errors:0 dropped:0 overruns:0 frame:0
TX packets:77678 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:6222155 (6.2 MB) TX bytes:6222155 (6.2 MB)
wlan0 Link encap:Ethernet HWadd
Problem installing driver for FTDI converter cable on my linux system
- date: January 17, 2011
I'm new to linux, so sorry if this turns out to be a no-brainer.
I'm trying to install an FTDI usb to serial converter driver on a linux machine (kernel: Linux 184.108.40.206, on a Phytec LPC3250 board) and it's not working for me. The driver itself comes with some c code and a makefile (got the driver from here: http://www.ftdichip.com/Drivers/VCP.htm, the 1.5.0 version for linux). When I try running make, I get the following error:
1 [[email protected]
2 /ftdi_sio/Rules.make:24: /lib/modules/220.127.116.11/build/.config: No such file or directory
3 make: Warning: File `/ftdi_sio/Rules.make' has modification time 1.1e+09 s in the future
4 make: *** No rule to make target `/lib/modules/18.104.22.168/build/.config'. Stop.
where 1...4 are line numbers that I added for clarity.
When I try to access the /lib/modules/22.214.171.124/build/ directory, I find that it is a symbolic link to the /usr/src/linux directory, and when I cd to /usr, there is no src directory! I
connect from linux desktop to linux laptop using lan cable
location: ubuntuforums.com - date: July 14, 2009
i just bought a new laptop and i want to move my files from my desktop to my laptop and it will take me ages using a usb so i want to use a lan cable, so basically i have one ethernet connection coming from a router spliting the connection between my brothers desktop and mine. so i have one ethernet connection that can be plugged into either my laptop or my desktop and i also have a lan cable and i want to be able to transfer files from my desktop to my laptop (which has internet), so how will i be able to do this?
Page: 1 2 3 4 5 6 7 8 9 10