LXer: How to upgrade from Ubuntu 10.04, 10.10 to Ubuntu 11.04 Natty Narwhal | Desktop & Server
location: linuxquestions.com - date: April 1, 2011
Published at LXer:
Ubuntu 11.04 Natty Narwhal Beta is released! If you have ubuntu 10.10 Maverick Meerkat or older version of ubuntu installed and you want to upgrade to the latest Ubuntu 11.04 Natty Narwhal, you can do it by following these instructions.
ubuntu 11.04 vs 11.10
location: ubuntuforums.com - date: November 17, 2011
ubuntu 11.04 *******
I've been running ubuntu 11.04 64 bit and 32 bit on my Acer Aspire windows 7 laptop and my compaq presario XP desktop for a couple of months from both the USB boot drive and the DVD.
The desktop boots into classic, but otherwise seems to run about the same.
Can read and write drives
Laptop picture quality on crystal eye webcam is not as good as good under ubuntu 11.04 as windows 7.
Laptop touchpad - vertical scroll is not recognized and the cursor jumps around much more than under windows 7.
But generally pretty satisfied, running FireFox, Thunderbird with Lightning and several other addons.
****** ubuntu 11.10
Windows XP Desktop - Compaq Presario
Could not get either the DVD 64 bit ubuntu 11.10 or the usb drive to run on my desk top at all. USB drive does not boot up and DVD starts, screen looks good before loading anything and then checkered boxes appear around left and top borders and does not load.
Webcam may be a little be
Uninstall 11.10 and go back to Ubuntu 11.04
location: ubuntuforums.com - date: October 30, 2011
I just upgraded my bonobo pro to ubuntu 11.10 and would like to go back to 11.04.
Can someone please let me know the best way to do that?
ns2.33 in ubuntu 11.04
- date: December 29, 2011
$ sudo apt-get install build-essential autoconf automake libxmu-dev libxt-dev gcc-4.3
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package gcc-4.3
E: Couldn't find any package by regex 'gcc-4.3'
I have make necessary changes : CC= gcc-4.3 in Makefile.in , SHLIB_LD="gcc -shared" in configure file in otcl-1.13 of ns2.33 folder....!
but no effect,
then I give ./install
* Testing for Darwin (OS X) environment
* Testing for Cygwin environment
Cygwin not detected, proceeding with regular install.
* Testing for FreeBSD environment
Ubuntu, 11.04 (fully updated)
location: linux.com - date: August 31, 2011
My main PC seem to have caught galloping bit-rot.
It's been working perfectly for two months but, in the last week or so it's started spontaneously hanging. I was just filing some emails in gmail (via Chrome browser - v13.0.782.218) and the whole system just hung; not even mouse movement. I haven't added any hardware recently. the hardware is only a couple of months old and I'm not running anything particularly weird except (maybe) VirtualBox (non OSE version).
There's nothing I can see in the logs (kern.log and syslog - excerpts below) and I can't find anything on the Ubuntu bug list which might affect me.
Any ideas about where I can look trace-wise and/or if some of the latest updates have caused any grief? :(
Aug 30 13:17:45 Silver-Streak2 kernel: [ 217.244605] wlan0: no IPv6 routers present
Aug 30 13:23:26 Silver-Streak2 kernel: [ 547.393520] exe (2370): /proc/2370/oom_adj is deprecated, please use /proc/2370/oom_score_adj instead.
How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]
location: ubuntuforums.com - date: April 30, 2010
11.04 users: First read post #59
Upgraded to Natty: Network Manager not connecting any more, check this out: Post #2
Natty new install :read through this "first" post :(if device is not recognized) : note the reference to USB_MODESWITCH >Natty users: and the link
Keep in touch
New Devices , RE: next generation , can have a look here #59 #60
This may relate to most of next generation devices it may help you get connected (but I never say die) as each device is different ,
the below is left for historical purposes , if asking why : then a udev rule may be required to bring up the net interface , so worth reading. again (I never say die) if read through most of this thread , had promise script to identify some modem ports
most of this was in place until these device came up,, the script will , hopefully identify most devices , suggest which switching methods c
[SOLVED] iscdhcpserver on Ubuntu 11.04
location: linuxquestions.com - date: August 24, 2011
I was wondering if anyone could tell me what is different about the new dhcp server in Ubuntu 11.04? I had dhcp3-server working in 10.04 just fine. I tried doing the same configuration for the new one, but no matter what I do I cannot get it to work. I have rebooted and restarted the isc-dhcp-server and still it will not give my device connected to eth1 an IP address.
I am using eth1 configured to use the 192.168.10.xxx network and I only have a couple of device that will hook up to it so I don't need a lot of IP addresses. Yes, I could use a static IP, but then I would have tear apart the main unit to get to them and configure them as static. I would rather not do that when I had Ubuntu 10.04 working. I would rather not do that as network manager and our Wi-Fi devices seem to work better in 11.04 and if I could just get the dhcp server to work I would be happy.
Anyone have any ideas?
Ubuntu 11.04 LTSP & DHCP3Server
location: linuxquestions.com - date: August 12, 2011
I swear everything has changed in 11.04.
I remember the last time I setup a basic LTSP server on Ubuntu that it was much... easier?
The problem I have is that I used to be able to simply add "eth1" or "eth0" to the /etc/default/dhcp3-server file and everything would be fine as long as the ip settings matched.
Now I can't seem to find that file at all. Also, 11.04 doesn't seem to have the /etc/init.d/dhcp3-server restart option. Has everything been renamed and moved since 10.04?
Ubuntu 10.04 Menus in Ubuntu 11.04
location: linuxquestions.com - date: May 5, 2012
I'll start out by saying I had a severe stroke three years ago. My reading abilities have gone from an Industrial Engineering level to about a third grade level, so please bear with me.
I've read somewhere that it's possible to get a 10.04 "Menu Structure" (along the top; ("something"), Places, System.
I upgraded from 10.04 to 11.04, but I can't get this structure. I do not like the left hand, vertical, "Menu". I can't find anything, and I'd like to use the 10.04 structure.
Can someone PLEASE provide a step by step procedure to do this. In 11.04 there are more abilities/software etc which I'd like to utilize.
[SOLVED] Ubuntu 11.04 Lunch bar and menu bar gone.
location: linuxquestions.com - date: April 5, 2011
So, I'm new to Linux in general. I installed Ubuntu 11.04 yesterday and played around a bit with Compiz, but as soon as I actually opened Compiz Manager of some sort the launch bar and the menu bar disappeared and i have no idea how to get them back. Restart does not help. And I'm rather worried that I have to reinstall Ubuntu. Therefore I hope you can help me restore my Ubuntu to it's former glory.
Thank you in advance
Page: 1 2 3 4 5 6 7 8 9 10