mount.nfs: Input/output error
location: linuxquestions.com - date: August 20, 2007
I have been trying to use a common $HOME on our 2 dedicated servers via
NFS and it fails. If I use udp the mount fails with this error on the
mount.nfs: Input/output error
while /var/log/messages shows an authenticated mount request on the server.
If I try to mount via tcp it gives me a no route to host error.
rpcinfo will work as long as I do not run it as root.
I suspect there is something blocking this network traffic. I have
appropriate entries in hosts.allow and /etc/exports. I have disabled
selinux and turned of iptables. I have started the appropriate daemons
on the server side. I have tried using other machines on which I know
this works as both client and server and I get the same errors. Do
you have any ideas about what is going on?
[SOLVED] Serial port input/output error
location: linuxquestions.com - date: July 23, 2009
Im new to this forum and very new to linux.
kernel-PAE.i686 (had to install this to get ndiswrapper to work)
My problem is:
I cant get the serial ports working. They are working under windows vista, so they cant be disabled in BIOS (i guess)
The command setserial -g /dev/ttyS* gives the output:
/dev/ttyS0, UART: unknown, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3
and according to this page that means that they dont exist.
I made a D-SUB where i crossed the wires to send back all the signals i send. And tried it in GTKTerm. But nothing happend except that everytime i tried to connect to a port the line: Input/Output error appeared in the konsole.
Could someone please help me with this? I googled like crazy, but could not find anything helpful.
Dar and cat: Input/output error
location: linuxquestions.com - date: March 29, 2006
I recently used dar to make a backup of my system, and was given the following error halfway through the process:
RPM iinstallation [error: failed to stat /mnt/windows: Input/output error]
location: linuxquestions.com - date: April 9, 2007
I got this error when try to install my own rpm."error: failed to stat /mnt/windows: Input/output error".
but the installation is running well. it is will effect my installation??
Fatal input/output error when writing blu ray discs in k3b
location: linuxquestions.com - date: September 1, 2012
I'm trying to archive data to blu ray discs as an added archive/backup. These are mostly photos and videos of the family and I don't want to risk losing them, especially the ones of our kids.
K3b version 2.02 on Ubuntu 11.10
Drive is a Lite-on IHBS112-04
I've never burned a blu ray disc in linux without errors going back to when I built this system back in December. I think I had some problem media because I was getting "the LUN appears to be stuck writing" errors in the debug output so I picked up some Kodak media. This looks good and I have some Verbatim on the way from newegg. Unfortunately while the new media works better (I no longer get the lun stuck writing errors, I'm getting this new error. k3b nearly finishes writing and at the very end (99%) says:
problems with k3b mandriva 2005 le, input/output error
location: linuxquestions.com - date: December 28, 2005
I am using I am using mandriva 2005 le. kernel 2.6.11-6mdk
I have been using k3b no probs. Then today i go to back up my data onto a dvd and it won't work. I click burn as usual and then i get ':-( write failed: Input/output error' and below it 'fatal error at startup input/output error'
I get the same thing with different dvd-r and dvd-rw Its weird as it was working fine last time and I haven't changed anything.
I clicked show debugging output and this is what it gave me
SONY DVD-ROM DDU1621 S2.9 (/dev/hdd, ) at /mnt/cdrom2 [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None]
TSSTcorp CD/DVDW TS-H552U US06 (/dev/hdc, ) at /mnt/cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R16; RAW/R96P; RAW/R96R]
K3b Version: 0.11.20
Bash: Input/Output Error on every command
location: ubuntuforums.com - date: September 27, 2008
I have a very old Dell Inspiron on which Ubuntu 7.04 is installed.
The kernel version is 2.6.24-19-generic.
Sometimes, suddenly something happens and then every command from bash gives the same error:
~$ autoconf -V
-bash: /usr/bin/autoconf: Input/output error
-bash: /usr/bin/python: Input/output error
The file system becomes read-only and no files can even be 'touch'ed.
However, uname -r (and possibly other commands) still keep working.
If you press Tab-Tab at the terminal, it hangs and then there is no way other than hard-boot to get stuff to work again.
Can anyone suggest something to repair this annoying recurrence.
"Unable to read NTFS $Bitmap: Input/output error"
location: ubuntuforums.com - date: June 18, 2012
When I restarted my laptop today I was faced with the following error message:
an error occurred while mounting /media/docs
press s to skip mounting or M for manual recovery
Then, when I try to open the 'docs' partition:
Error mounting: mount exited with exit code 1: helper failed with:
mount: only root can mount /dev/sda3 on /media/docs
And when I try
sudo mount /dev/sda3 /media/docs
this is the message I get:
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
I used t
Hard drive Input/Output error
location: ubuntuforums.com - date: July 11, 2011
Almost all of my normal methods have been completely thwarted by this hard drive. It's a Samsung HM320JI and suffers from bad sectors. A little back story. My friend wanted me to backup his documents and format his hard drive with Ubuntu since he was sick of Vista. The laptop's hard drive wouldn't even boot, so I tried a livecd but the disk drive appears to be sluggish so I removed the hard drive and put it into my desktop at home. I boot up Ubuntu from a pendrive and mount the hard drive and start off with a cp -rv /media/xxxxx/Users/xxxx /media/backupdrive/blah. You get the idea. After 5 minutes of backing up I get a Input/Output error on about 100 files then the hard drive auto unmounts and cannot be found using fdisk -l, forcing me to reboot to try again only to run into the same headache. I also tried launching from the Vista startup disk and repairing it with chkdsk /r but that quit at 10% with no errors, right as it hit step 2 of 5. Is anyone here knowledgeable enough about fsc
Input/output error when accesing a directory
- date: October 25, 2010
I have a directory "foo" on a NTFS partition of my hard drive, which i created a couple of days ago.
After creation it worked fine and i put some files in it, but the day after i get the following error:
:/media/disk1$ ls -l foo
ls: cannot access foo: Input/output error
:/media/disk1$ ls -l
ls: cannot access foo: Input/output error
d????????? ? ? ? ? ? foo
(+ a succesful listing of other files and directories)
I get the Input/output error no matter what i try to do to the directory (rm, mv, cd, etc.), and no matter which privileges i have.
I read some threads suggesting that it is a hardware problem. I tried running ntfsfix on the partition:
:~$ sudo ntfsfix /dev/sda3
Mounting volume... OK
Processing of $MFT and $MFTMirr completed successfully.
NTFS volume version is 3.1.
NTFS partition /dev/sda3 was processed successfully.
I have also run the short and the long SMART
Page: 1 2 3 4 5 6 7 8 9 10